| |
|
|
Rubeer Hose:
|
|
|
|
 |
|
|
Used for suction of water under low pressure and finds it's use in irrigation, dam projects, agriculture, Excavation of mines and dewatering operations of general nature. |
|
| |
| WATER SUCTION HOSE :- |
|
| |
|
|
|
| |
|
|
| |
|
|
|
| |
Lining |
: |
Natural rubber compound free from air blisters, porosity or any other visible defects. |
| |
|
|
|
| |
Reinforcement |
: |
Natural or synthetic fabric or a combination thereof with a helical GS wire (as per IS-280/78) embedded between the reinforcement plies in case of smooth bore and internal in case of rough bore. |
| |
|
|
|
| |
Cover |
: |
Corrugated, cloth-marked finish outer cover made from natural rubber compound resistant to abrasion and weather. |
| |
|
|
|
| |
End Connection |
: |
Each hose length has soft ends for clamping or can be supplied with built in nipples and flanges on request. |
| |
|
|
|
| |
Temperature Range |
: |
-400F to + 1580F |
| |
|
|
|
| |
Length |
: |
Upto 100 mm X 15 meters above 100 mm X 7.50 meters |
| |
|
|
|
|
| |
|
|
| |
|
|
 |
This Hose used for Delivery purpose has a wide range of application in various industries, mines, Dams, Railways, Construction Sites, Irrigation, Horticulture and in calamities such as fire fighting and dewatering during floods and numerous such allied uses…
JYOTI has the distinction of having ISI Certification Mark Licence for the complete range of water hoses(confirming to IS:444/87) manufactured in both Women textile & Braided Synthetic Yarn reinforcement for all types i.e.Type-1 Type-2, Type-3A & 3B
|
|
| |
|
|
General purpose rubber water hose :- |
| |
|
|
|
| |
|
|
| |
|
|
|
| |
Lining |
: |
Uniform Seamless lining of Natural or blend of Natural and Synthetic rubber. |
| |
|
|
|
| |
Reinforcement |
: |
Plies of Woven textile or braiding of high strength synthetic fibre, and/or Nylon cord. |
| |
|
|
|
| |
Cover |
: |
Black, Smooth or Cloth marked finish or ribbed cover of weather and abrasion resistant rubber. |
| |
|
|
|
| |
Temperature Range |
: |
-40F to +158F |
| |
|
|
|
| |
Length |
: |
Mandrel made hoses unto 18.5 meters. Moulded braided Hoses in long continous length. |
| |
|
|
|
|
| |
|
|
|
| |
|
|
 |
Designed for heavy duty water suction and discharge service, where rugged yet flexible hose is required both for dewatering and delivery purposes during excavation of mines, project construction, deflooding operations and for handling sewerage, waste water and mud. Type of Hoses : Type 1-Hoses with rough bore, Type 2-Hose with smooth bore.If the liquids are non-corrosive and do not carry solids in suspension, as in the case with muddy water, rough bore is used; in other cases smooth bore is used; |
|
| |
|
|
|
| |
|
|
Water suction and discharge hose,heavy duty :- |
| |
|
|
|
| |
|
|
| |
|
|
|
| |
Lining |
: |
A blend of natural & synthetic rubber compound resistant to water and abrasion. |
| |
|
|
|
| |
Reinforcement |
: |
Natural or synthetic fabric or a combination there of with two helical GS wire (as per IS-280-78) embedded between the reinforcement plies. In case of rough bore, of the two helical wire reinforcements, first is internal and visible from inside and the second is embeded between layers of plies. |
| |
|
|
|
| |
Cover |
: |
Corrugated or plain cloth-marked finish outer cover made from natural rubber compound resistant to abrasion and weather. |
| |
|
|
|
| |
End Connection |
: |
Each hose length has soft plain ends on each side for clamping or built in nipples/flanges on request. |
| |
|
|
|
| |
Temperature Range |
: |
-400F to + 1580F |
| |
|
|
|
| |
Length |
: |
Upto 75 mm X 15 meters (Max.) Above 75 mm X 7.5 meters |
| |
|
|
|
|
| |
|
|
|
| |
|
|
 |
Type 3A : is used for delivery of water for sprayers and sprinklers for irrigation system and other industries at high pressure. |
|
Type 3B : Car washing hose is used for delivery of water at high pressure for car washing in garages & service stations.
JYOTI has the distinction of having ISI Certification Mark Licence for the complete range of water hoses covered under IS:444/87, both Woven Textile & Braided reinforcement.
JYOTI has the distinction of having ISI Certification Mark Licence for the complete range of water hoses covered under IS:444/87, both Woven Textile & Braided reinforcement
|
| |
|
|
|
| |
|
|
General Purpose Rubber Water Hose and Car Washing Hose :- |
| |
|
|
|
| |
|
|
| |
|
|
|
| |
Lining |
: |
Uniform Seamless lining of Natural or blend of Natural and Synthetic rubber. |
| |
|
|
|
| |
Reinforcement |
: |
Plies of Woven Textile or braiding of high strength synthetic fibre. |
| |
|
|
|
| |
Cover |
: |
Black, Smooth or Cloth marked finish of weather and abrasion resistant rubber cover for lasting performance while used under severe working conditions. In addition, for type 3-B, the cover is highly resistant to oil & weather. |
| |
|
|
|
| |
Temperature Range |
: |
-400F to + 1580F |
| |
|
|
|
| |
Length |
: |
Mandrel made hoses upto 18.5 meters length, Moulded braided Hoses in Continuous long length. |
| |
|
|
|
|
| |
|
|
|
| |
|
|
 |
Type 1 and 2 of the hose have multiple applications for use with Compressors and other equipments, as a pneumatic tool for engineering purposes. |
|
Type 3 hose finds it's use in deep excavation operations undertaken in mines, construction of hydel projects, dams and wherever drilling is required in hilly and rocky terrains.
JYOTI has the distinction of having ISI Certification Mark Licence for the complete range of hoses covering both WOVEN TEXTILES & BRAIDED RAYON REINFORCEMENTS for all types i.e Type-I Type-II & Type-III. |
| |
|
|
|
| |
|
|
Rubber Air Hose :- |
| |
|
|
|
| |
|
|
| |
|
|
|
| |
Lining |
: |
Uniform Seamless lining made from a blend of Natural Synthetic rubber compound. In addition, for Type-3 hoses lining is resistant to oil mist. |
| |
|
|
|
| |
Reinforcement |
: |
Smooth or Cloth marked finish, abrasion and weather resistant natural rubber compound. |
| |
|
|
|
| |
Temperature Range |
: |
-310F to + 1580F |
| |
|
|
|
| |
Length |
: |
Mandrel made hoses 18.5 meters maximum, Moulded braided hoses in Continuous long length. |
| |
|
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
 |
Type 1 and 2 of the hose have multiple applications for use with Compressors and other equipments, as a pneumatic tool for engineering purposes. |
|
Type 3 hose finds it's use in deep excavation operations undertaken in mines, construction of hydel projects, dams and wherever drilling is required in hilly and rocky terrains.
JYOTI has the distinction of having ISI Certification Mark Licence for the complete range of hoses covering both WOVEN TEXTILES & BRAIDED RAYON REINFORCEMENTS for all types i.e Type-I Type-II & Type-III. |
| |
|
|
|
| |
|
|
Rubber Air Hose for Pneumatic Purposes :- |
| |
|
|
|
| |
|
|
| |
|
|
|
| |
Lining |
: |
Uniform Seamless lining made from a blend of Natural Synthetic rubber compound. In addition, for Type-3 hoses lining is resistant to oil mist. |
| |
|
|
|
| |
Reinforcement |
: |
Smooth or Cloth marked finish, abrasion and weather resistant natural rubber compound. |
| |
|
|
|
| |
Temperature Range |
: |
-310F to + 1580F |
| |
|
|
|
| |
Length |
: |
Mandrel made hoses 18.5 meters maximum, Moulded braided hoses in Continuous long length. |
| |
|
|
|
|
| |
|
